Dyson DC62 Floor Attachment Wheel Holder Replacement
Description
The wheel holder on my Dyson DC62 floor attachement broke, and the wheel fell out, so I modeled it in Fusion360 and now it's replaced. The spring doesn't push it up at all as in the original part but it still functions without problems. You need to drill a small whole for the spring if you wanna use the spring. I printed it in PETG so its a bit more flexible and doesn't break as fast as PLA, but PLA probably works fine too. I used support on buildplate and set "Detect thin walls" in prusa slicer. Resolution shouldn't matter too much, I used 0.2 with a 0.4 nozzle. Also I did 4 walls and 25% infill, probably works fine with less as well. If this worked for you let me know and post a make. Thanks!
Statistics
Likes
0
Downloads
0