LucyLongRange 6in 7in Digital/Analog iNAV (#minilongrange)
Description
### Lucy Long Range LLR6 LLR7 - OpenHD, Vista, Analog iNAV A larger 6" and 7" version of the #minilongrange from Dave_C_FPV. Original design can be found here: https://www.thingiverse.com/thing:4584851 The #minilongrange is a perfect frame, unless you are looking for something a little bigger. Enter the #LucyLongRange LLR6 and LLR7. The frame and TPU parts have all been designed in Fusion360, this is not a simply stretched or scaled up MLR5, each part was redesigned for this larger scale. Similar remixes and designs exist, however were always missing something, FC mounting patterns, ARM sizes, motor hole spacing, stabilizer ARM brackets. I decided to take the time to use the original LLR5 look and feel and create a new larger size frame incorporating the awesome chain ring bolt assembly process and adding all? the missing features from other designs. #### v10.0 <p> This is the initial frame release. Use the STL's and print this quickly in PLA to test all of your components before cutting CF. If you notice any issue or need alternate mounting patterns, or feel something is off or missing leave a comment below. </p> #### Frame Highlights * Front Stack - 20x20mm + 30.5x30.5mm Mounting Patterns * Rear Stack - 20.20mm * Rear TPU GPS Mount + CRSF Immortal T Mount (fits Matek M8Q-5883 GPS+Compass) * Rear TPU V Dual Antenna + SMA Antenna Mount * Front TPU Mount - Support for up to 20x20 Cameras (use bracket to downsize) * Integrated GoPro Style Mounting * Folding Immortal-T Antenna Bracket * Chain Ring Bolts Frame Assembly * ARMS in 6" & 7" * Arm Brackets 6" & 7" * Motor Bolt Pattern 12x12mm(m2) & 16x16mm(m3) Fits most motors from 20xx to 24xx series * Underslung RPi mounting support for OpenHD / WifiBroadcast Digital Systems #### Hardware Specifications * Flight Controller - Matek F722SE-Mini * ESC - Flywoo 35A 20x20 * VTX - ASUS AC-56 with MMCX conversion * VTX Antenna - Foxeer 5.8ghz RHCP * Camera - Waveshare NIOR with IR filter * Power - 3A DCDC Buck * OpenHD System - Raspberry Pi Zero W * Motors - XING 2203.5 1900KV * TBS Crossfire Diversity w/Immortal-T Antennas * Buzzer - Vifly v1 #### Software * iNav 2.6.1 * OpenHD 2.0.8 https://github.com/OpenHD/Open.HD/wiki #### Building Notes * Cut only 12mm or 16mm holes in arms for your motors. Cutting slots will create less strong arms. Same for support brackets. * Test fit a 3D printed frame first. * 6in Version 4mm light ARMS, 5mm heavy duty * 7in Version 5mm light ARMS, 6mm heavy duty * Purchase chain ring bolts with shoulder height that equals (0.5mm less) than the upper deck, lower deck, and chosen arm thickness. * Arm supports size from 2.5mm to 3mm seems good * *UNI* Parts are for all builds, DJI, Analog. *OHD* Parts are for OpenHD/RPI-Zero Builds
Statistics
Likes
22
Downloads
0