Logitech Z623 Speaker Wall Mount
Description
Hi, I needed a wall mount for my beloved Logitech Z623 speakers, so I created one. (!!!) Please note, I created the wall mount for the speaker without the buttons. Since that's the one I needed to mount to the wall. It could be that you want to mount the speaker with the buttons as well. Therefor I also added the STEP files of the wall mount so you can make adjustments. (EDIT: I tried fitting the speaker with the buttons in the wall mount and it seems to fit just fine aswell) For this build you will need some tools: - Threaded inserts M6, inserted by means of heat. (7X) https://www.amazon.nl/gp/product/B085X24H45/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 - A soldering iron is recommended for inserting the M6 threaded inserts. I use the Dremel 2000 VersaTip Soldering iron. Which is heated by butane gas. If you don't own a soldering iron and want the same as I have, please note to also buy some butane containers as they are often not included when buying the tool. - Din7991 - Countersunk M6 Bolts, I used the 12 [mm] length variant. But if you have longer bolts in stock, that would also be fine. - Double sided tape for sticking to the wall. You can also chose to drill a hole in your wall, but you'll have to adjust the Step files attached. The double sided tape I use can handle the weight of the speaker just fine. I was able to print all the required parts in one print of approximately 20 hours on my Ender 3.
Statistics
Likes
9
Downloads
0