Playstation/ Xbox LED Light
Description
Hello Guys! This is my version of a Logo for my Playstation 5 as a light with a stand. The original design was created by Christopher Quinalty: https://www.thingiverse.com/cq842000/designs I tried printing his design of his Sony Play Bust with an Elegoo Mars 2 Pro. After the 3rd attempt i gave up on it. I had to scale it down a little bit but still couldn't get a good result based on the hollow design. The walls ended up being only 0.4mm thick. Therefore, if you touch it a little too rought it will break, as it did for me. So, I decided to re-design it a bit. After I finished the Logo I was like yea, why not making it shine even more! I bought a 30 LED/1m 5V with remote LED-strip for 10$ on Amazon and designed a socket with Playstation on the front. (For Xbox don't worry, I've uploaded a clean socket as well for you guys!) With the 30 LED/1m you can fit up to 10 LED's around the socket as you can see down below in this post. I fixed the strip inside and the cable which goes out of the socket with some hot glue. You know, just in case. After glueing everything together, I coated it with some clear varnish. I hope you enjoy it and please support the original designer as well!
Statistics
Likes
241
Downloads
0