Mask Case FFP2
Description
FFP2 Mask-Case This is a simple Mask-Case for a typical FFP2 Mask. Never loose your mask again or stop it from getting wrinkled in your pocket. If you like this Design please consider giving it a like. If you want to support me you can give me a tip on my paypal.me account. ---------------------------- My 3D-Print settings: ---------------------------- Filament Type: PLA Slicer: Cura Ultimaker Size: 163.9 x 21.1 x 101.5 mm Layer Height: 0.14mm Line Width: 0.4mm Wall Thickness: 0.8mm Infill Density: 30% Print Speed: 55mm/s Initial Layer Speed: 10mm/s Brim width: 3mm You may need a support structure for the hook. With this settings: 32 grams (10.82m) Filament is needed. It takes about 7 hours to print. It costs about 0.81€. (25€/kg)
Statistics
Likes
1
Downloads
0