Senseo water tank vlotter
Description
This part was designed for the water storage cabinet of the senseo coffee machine. It is fully closed to prevent water from coming in as opposed to the original part, however it floats and works well. The print should be stopped at height: 22.1 exactly, to insert magnet(s) this should be done inside the slicer since the last part of the print goes extremely fast so you will not be able to stop it manually in time. The magnet(s) should be able to fit inside a hole of 4.1x4.5x4.5. We used two round, flat magnets and placed them with the magnetic side to the back wall of the print. Remember not to use supports inside the model to prevent the printer from closing the hole that is meant for the magnets.
Statistics
Likes
0
Downloads
0