150 x 150mm Calibration square
Description
I found the 20mm X Y Z cube wasn't big enough to give an accurate calibration. https://www.thingiverse.com/thing:214260 So I made a simple 150x150 square which gives a much more accurate result due to being much larger. Print in vase mode (spiral mode) to conserve plastic and reduce print time. Calibration tutorial can be found here: https://all3dp.com/2/how-to-calibrate-a-3d-printer-simply-explained/ I took several measurements and averaged them out to give me the figures to work out the steps / mm settings I needed.
Statistics
Likes
0
Downloads
0