Italian to North American rear license plate adapter (pieces for 300mm printer)
Description
his is a license plate adapter to fit a North American license plate to an Italian car. It worked for my 1972 Autobianchi Giardiniera, but I based it on information I found in general for Italian license plates as well. I've used it with a standard British Columbia license plate (a standard North American style car plate). Note: Since this print is 307mm wide, I've also created a print that one piece if you have a larger printer than my 300mm print bed. See: https://www.thingiverse.com/thing:4816076 Bolts to affix the BC license plate were some 4mm bolts I had on hand and some washers that were big enough to not go through license plate mounting holes. (I just re-used the car's screws to affix the bracket to the car.) License plate hardware: bolts: M4 x 10mm nuts: 2.5mm (thick) x 6.75mm (wide) washers
Statistics
Likes
0
Downloads
0