Arrma Limitless 8s w/ Castle 1717 or Hobbywing 800kv system
Description
Here are all the parts you need to make your Arrma Limitless/Infraction/Felony into an 8s vehicle! All that needs to be dine is new holes have to be drilled into the chassis for the new setup. Update (4/12/2021): -Battery Tray V2 added! It is a bit stronger than the last, having a new screw location on the side that faces the body. -Motor Mount V3 - Provisions for 7mm locknuts. Same part as the V1, just with the nut inserts. -ESC Tray V2 - 2mm thicker than the last. Print in PETG for best results! or Nylon/Carbon filled filament if you have access to it like I do. Some of the parts will need support in order to be printed. Some on the other hand will not, so don't print parts together if only one needs support!!! 80-100% infill for best results!
Statistics
Likes
4
Downloads
0