Armattan Tadpole - Caddx Vista Nebula Pro Camera Mount - M2 Standoff
Description
04-12-2021 Update: Added a longer version of camera mount to keep props out of view even at lower camera tilt. Testing different ways to mount a Caddx Vista Nebula Pro Camera and naked Vista unit on a 3 inch Tadpole frame. This is a camera mount to mount a Caddx Vista Nebula Pro camera (19mm wide) on a Tadpole, replacing the camera cage. I use 2 M2x25mm round brass standoff with an outside diameter of 3.3mm +-0.2mm. This raises the height from 20mm to 25mm, giving you more room to fit the Vista unit. Don't remember where I got them but you can get something similar from Amazon https://www.amazon.com/Electronics-Salon-Brass-Female-Female-Standoff-Assortment/dp/B014KJX65W I also used 2 M2 metal nuts/spacers to raise the rear top plate height. https://pyrodrone.com/products/2mm-threaded-m2-anodized-stack-spacer-5-pcs This may void the warranty so use at your own risk. I also have another Caddx Vista Nebula Pro Camera mount that fits on top of the Tadpole camera cage. See link here https://www.thingiverse.com/thing:4816313
Statistics
Likes
3
Downloads
0