Flywoo Explorer SMA mount
Description
Please note: **You can print this without supports if you move the bottom of the SMA holder through the build plate in your slicer until the underside of the bracket is flush with the build plate.** The SMA mount will not be entirely flush, but for me that is no problem (see picture). This is a very simple SMA holder that allows you to mount a screw-style SMA mount on your flywoo explorer. The VTx that came with it died, so I had to retrofit another one that did not have a u.FL but a MMCX connector, so I could not use the stock antenna and had to retrofit my own MMCX -> SMA pigtail. In the picture you see an older version that puts the antenna a bit further back which makes the quite rigid pigtail touch the GPS mount and bend a bit extra backwards. In the version I uploaded I moved the SMA mount itself forward a bit so you should have less problems with that. It is parametric so you should be able to adjust it to fit simillar frames, open it here: https://cad.onshape.com/documents/87d0b700656aa89e91663874/w/fd5ab1950d01329267da26e8/e/68c9c678360e689d673ac271
Statistics
Likes
3
Downloads
0