Redesigned fan-bracket and part cooling
Description
Hello guys! This is my first "thing", have fun!:) Because the original fan design of the D2 and D3Pro are not that good to be honest, I simply redesigned it. For me its working great so far and much better than the original one! You will need to get a 5015 fan to fit the part cooling, the blower fan is going to fit, but I changed it too. Also you will need to get rid of the original "cave" wich is easily done by removing the 2 screws at the top. I also uploaded a simple wire holder, so they stay where they belong. The holes are designed to fit the original "Noctua anti vibration NA-SAV3", but I guess you could use some bolts too. Just to let you know, Im not a professional, so dont expect the best results, but I couldnt find any other solutions out there. There is also a small holder for the LED, I changed that one too, but you might fit the original into the hole too. HOW TO PRINT: -I printed the "part cooling" on a Raft with touch supports, no full support on this one! Otherwise you could get some inside the tube. I hot glued that one onto the fan. -The "fan bracket" was printed standing as you get it in the stl file with full support, you could print it without, if there is no need for pretty results. The "cable holder" just needs some touch support, no full. Please fell free to ask if there are any questions!
Statistics
Likes
0
Downloads
0