Modular sieve
Description
I needed a deep sieve to separate out the smaller silica beads to fill desiccant containers - small beads get loose of the container and make a mess - silica beads bounce well so the sieve bowl has to be deep or you make a mess At that depth it would be a waste to have to print the sieve for each size I wanted to separate out so I designed the sieve to just change the bottom. - need four m3 x 10mm screws and nuts - print a pair of bowl and backing - print the sieve plate with infill settings to give the correct grid size for your needs (e.g. 25% rectilinear) - alternatively edit the sieve plate model to punch holes at the size/shape you need
Statistics
Likes
1
Downloads
0