Razor Knucks
Description
Original Designer: BiscuitsOnTheFloor Modified By: Zach307 Hardware to Purchase: • 4x: m3x0.5mm, 16mm Long Button Head Screw • 4x: m3x0.5mm Locknuts • 2x: m3x0.5mm, 6mm Long Button Head Screws • 2x: m3x0.5mm Hex Nuts • 3x: 6mm OD x 3mm Thick Magnets: Parts to Print: • 1x Handle • 1x Blade Holder • 2x Hex Link • 2x Countersunk Link Notes: • Be sure to match the polarity of the magnets. • You might have to drill out the magnet holes with a ¼” (6mm) drill bit. • Superglue the magnets in place. Adding a bit of Kleenex helps with the bond.
Statistics
Likes
18
Downloads
0