Orqa FPV.One - Shark Byte VRX Detachable Mount (for closer fit)
Description
A quick remix in Tinkercad to have Shark Byte VRX attached closer to the ORQA goggles. Combined weight is not trivial and applies pressure on the nose (both with HDO2 and ORQA goggles). Thus, I thought every millimeter counts and also added plenty of vent holes since VRX generates quite a bit of heat. Attaches with velcro and does its job. Waiting on 15cm flat ribbon cable + changeable Micro- and Mini HDMI connectors to arrive to have cleaner wiring. You may have to re-drill the holes, I was not sure what screws I would end up using for attaching the 3 parts together. Use low profile/sunk screw heads and cover with (liquid)electrical tape for extra safety. Easy to print and tree structure supports in Cura make them super-easy to remove. PS! If anyone has an idea/design for a bigger ORQA face plate (or 3D Scan of the goggle to get the face-plate design mating right), please let me know. Combined weight with Shark Byte VRX is still an issue that is not cured by over-tightening the goggle strap. Bigger add-on face plate for more customizable fit solutions and to counter the weight issue with additional modules & weighty antennas might be the direction for further improvements.
Statistics
Likes
2
Downloads
0