Spinning Top
Description
My design of a spinning top with a geared puller. SETTINGS: Spinner top part: Layer Height: 0.15 ; Infill: 80-100% Spinner bottom part: Layer Height: 0.15 ; Infill: 80-100% Spinner screw: Layer Height: 0.15 ; Infill: 80-100% Housing: Layer Height: 0.20 ; Infill: 20% Pull Rack: Layer Height: 0.15 ; Infill: 100% No support is needed for any part if correct orientation is used, see print orientation picture.
Statistics
Likes
85
Downloads
0