BTT TFT24 V1.1 to Eryone 3D printers
Description
Source from https://www.thingiverse.com/thing:4231367 A custom mod to replace the Eryone LCD with a BTT TFT24 v1.1 touch screen. Front - 0.2mm, 30% infill, face down, brim, no support; Backplate - 0.2mm, 30% infill, ** sideway, brim, support (Tree, everywhere, 80° angle - for clean mounting holes) ; Backplate Marlin compatible- 0.2mm, 30% infill, brim, no support (sandwich between Front housing and Backplate, needs M3-25 screws); Standoffs 0.2mm, 100% infill, brim, and no support. BOM: 4 M3-20 screw; ** You must print the backplate sideway, otherwise, you won't be able to install or remove it from the Eryone printer (The tags break right away if you don't print it sideway).
Statistics
Likes
2
Downloads
0