Camera Zero
Description
This is an actively-cooled compact camera housing for a Raspberry Pi Zero WH, PiMoRoNi Trackball, an Arducam High Quality Camera kit, and an Adafruit 16-pixel RGBW Neopixel ring light. The software for this build can be found on [Github](https://github.com/eat-sleep-code/camera.zero). ## Getting Started ### You will need the following non-included parts: * (1) - Raspberry Pi 4B * (1) - Micro SD card (Sandisk preferred) * (1) - [Arducam High Quality Camera with 6mm CS Lens](https://www.uctronics.com/arducam-high-quality-camera-for-raspberry-pi-12-3mp-1-2-3-inch-imx477-hq-camera-module-with-6mm-cs-lens-for-pi-4b-3b-2b-3a-pi-zero-and-more.html) * (1) - [PiMoRoNi Trackball Breakout](https://shop.pimoroni.com/products/trackball-breakout) * (1) - [Adafruit 16 x 5050 RGBW Natural White NeoPixel Ring](https://www.adafruit.com/product/2855) * (1) - [Set of 10cm Female to Female Jumper Wires](https://smile.amazon.com/gp/product/B01MU0IMFF/) * (1) - [Noctua 40mm x 10mm **5-volt** Fans](https://smile.amazon.com/gp/product/B00NEMGCIA) * (1) - [40mm Fan Grill/Guard](https://smile.amazon.com/gp/product/B07JM67CZ5) * (1) - [Set of M3, M4, M5 Cap Head Screws](https://smile.amazon.com/gp/product/B07Q24FV8T) * (1) - [Set of assorted M2.5 Cap Head Screws](https://smile.amazon.com/gp/product/B07VG889RW) ### You may need the following additional tools: * [Metric tap set](https://smile.amazon.com/gp/B07FG1MJND) * Needle nose pliers * Xacto Knife (for cleaning up small imperfections in prints)
Statistics
Likes
17
Downloads
0