Battery holder for Oculus Quest 2 (stock strap and GomRVR Halo strap)
Description
These are parametric models for an external battery (power bank) holder that attaches to the original strap and the GOMRVR Halo strap. Fusion 360 model included: set the following parameters: - width = width of the battery pack - depth = depth of the battery pack The STL generated for an EMOS battery (62mm x 15mm). If you comment your battery dimensions I am happy to add more STL models, but using Fusion 360 you can generate your own. You have to pull the top head strap through the slot on the top. For best cable management the battery ports should face the opposite way as the USB port on the headset (right), so the cable makes an "S" curve and doesn't hang on either side. UPDATE1: attach the bottom part, which you can do by drilling (poking with hot nail) a hole in the bottom part, threading a piece of Velcro thru it, and attach the Velcro behind the foam insert. Please see attached photos (purple filament). UPDATE2: print the model "62x15mm gomrvr (with hole)" that includes the necessary hole (I also added the f3d Fusion 360 model)
Statistics
Likes
9
Downloads
0