Ikea FAKTUM kitchen leg
Description
The plastic of my old Ikea FAKTUM kitchen leg shattered into pieces. So i remodelled it. because Ikea used a very weird thread on the top screw, i also remodelled that one to use M30x3.5 thread. I printed this on my Prusa Mini+ with the following settings in prusa slicer: - Nozzle: 0.4mm - Standard 0.20 QUALITY print preset (only changed the perimiter walls from 2 to 3.) - Esun PLA+ black at 220°C
Statistics
Likes
0
Downloads
0