EZClip Case for DC-DC Buck Converter
Description
This is an EZ Clip Case for the DC-DC Step-up Step-down Converter from Amazon with Voltage Display. It was designed so that it allows to be easily mounted but leaves enough space for cooling the electronics. The Converter Used is this One: http://www.amazon.de/dp/B075JQTPX6/ Both Long Holes can be used for M3 Screws to Mount it accordingly or place it with Zip Tie wherever it is needed. The Base should be printed downards with the pins facing upwards. Depending on your Printers Quality the Pins which hold the Convert in place may be troublesome, but they came out perfectly for myself. It was printed on a Creality CR-10v3 25% Infill No Support Layer Height 0,2 Nozzle 0,4mm
Statistics
Likes
3
Downloads
0