Ender-3 V2 customizable feet
Description
I needed to raise my Creality Ender-3 V2 in order to fit bigger fans to the underside of the printer and I found and printed the ones by TekkieWombat (https://www.thingiverse.com/thing:4599931) Afterwards, I realized I need even more clearance, so I decided to design my own, customizable, version of these feets. The footprint is fixed to 44mm x 45mm The mounting holes are arranged by 34mm x 35mm <b><u>This design comes with following customizable options:</u></b> <b>Printer Clearance</b> This defines the space between the underside of your printer and the top surface of the table <b>Feet is Ender 3 V2 Rear Left</b> On a Creality Ender-3 V2, the feet of the rear left side needs to be adapted in order to reserve some space for the cable holder. In case you print a complete set of feets for your Creality Ender-3 V2, make sure, that you activate this option for one (1x) feet only ;) Values: "0" = Option is deactivated, "1" = Option is activated <b>Mounting Holes</b> Activates the generation of mounting holes. Values: "0" = Option is deactivated, "1" = Option is activated <b>Mounting Holes Diameter</b> Defines the diameter of the mounting holes. This parameter is only relevant in case the option "Mounting Holes" is active <b>Model Scale</b> This parameter allows you to re-scale the whole model. The re- scaling affects all elements! "1.00" means "Original size" Attention: USE WITH CAUTION! <b><u>NOTE #1: These feets have not been printed yet. In case of any issues, pls. provide me some feedback.</b></u> NOTE #2: All values are according to the Metric System in millimeter [mm]
Statistics
Likes
7
Downloads
0