MINI x-end new version
Description
New version to prevent the MINI-x-carriage from jamming at the end of the arm. I designed a different version of the x-end for the Prusa MINI, as tightening the screws led to clamping problems on the MINI-x slide when it was running towards the x-end. That's why I developed a version in which the M5 grub screw clamps the rods in such a way that there is no distortion and the MINI-x slide can run freely, which was not the case before. I guarantee it will work well and that the problems with the MINI-x slide on the end of the arm will be a thing of the past. In addition, you have easier access to the bearing housing 623h and you do not have to take the X-carriage halfway apart because of the belt. required parts: 4x M5 x 4mm grub screw (DIN 913)
Statistics
Likes
2
Downloads
0