Green Goblin RC Truck (Maximum Overdrive movie)
Description
Build Notes: -the Frame doesn't need heavy infill 15 to 30% is fine -thin walling the body will help to save weight even better light weight pla -the electronics are adequate, but feel free to find better -tamaya tires work too -tpu tires pla everything else -I used recovered laptop batteries in 3s config to power it and it works good 3s lipo also works -I used rafts and support from platform except for the sleeper, grill, and rare other parts tht need everywhere -join frame parts with cryanoaccelate glue -join grill, hood, and cab with cryanoaccellate glue -join breathers, caps to cab with cryanoaccellate glue -join ujoints with grub screws -join stacks to sleeper with cryannoaccellate glue -bolt other parts with M3 -use reciever with individual servo outputs powered from the bec on the esc -the assembled cab bolts to the frame in 4 places -batteries can be put inside the cab and accessed by lifting the sleeper on/off Other required components: 22 @ 10x15x4 mm Deep Groove Ball Bearings (6700ZZ) 1 @ steering servo std size 6 @ 80 mm shock 1 @ 12v motor 550rpm 6mm diameter (like ZGA37RG) or substitute one better 1 @ 12v motor esc (like BDESC-S10E-RTR) or substitute one better 44 @ M3x8 cone point grub screw 3mm bolts kit & 3mm nuts kit Transmitter of choice and reciever of choice 1mm piano wire to make mirrors https://youtu.be/k2D8PrBKAis axels, and transfer case are heavily derrived from MrCrankyface's V4 work
Statistics
Likes
7
Downloads
0