MSX Arcade Stick
Description
MSX Arcade Stick ============== In trying to play the MSX games in the best possible way, I searched for a joystick worthy of the name. Unfortunately the MSX standard, not enjoying the same notoriety as other platforms, has few modern solutions available. Many of which are really too expensive. So I decided to build my own microswitch-based one and make it available to the community. In the lines and colors I was inspired by the Philips NMS models. To make it I used components that I already had at home but if you want they can also be easily found on Amazon: * [an arcade stick like this](https://www.amazon.it/dp/B078RNRG92?&tag=sede-sb) * [a db9 extension cable like this](https://www.amazon.it/dp/B078RNRG92?&tag=sede-sb) For 3D printing, if you don't already have one, you can turn to various online services such as the one offered by [@imprinthings](www.imprinthings.com). Use PLA for logo/logo border, bottom, middle and top case parts. Use TPU for feets and cable hole. A minimum of familiarity with soldering is required to connect everything following the MSX joystick port's standard. Any advice or idea in the comments is welcome!
Statistics
Likes
3
Downloads
0