Drilling Template for Kluson Locking Tuners for Strats
Description
This is a parametrized drilling jig to upgrade a Strat to Kluson Vintage locking tuners, "MLV6LN", see https://kluson.de/de_trad.php?ser=vl. You can probably customize the parameters to your own measurements to use it for other tuning machines. **They are currently configured for my ‘95 Fender MIM Strat. If you have another model, you might have to adjust the parameters slightly as well!** The holes were drilled with a 1.5mm drill bit, about 8mm deep (past the jig). The pegs on the template are supposed to go in the tuning machine holes and align the jig, together with the lip that sits against the sloped side of the headstock (where your tuner buttons usually sit).
Statistics
Likes
3
Downloads
0