Daft Punk plant pot
Description
I used 0.6 mm nozzle to print both helmets, but u can use 0.4 mm nozzle Layer Height : 0.3 mm Perimeters: 2 (1.2 mm) Infill : 5% Giroid Supports: Yes
Statistics
Likes
2305
Downloads
0
I used 0.6 mm nozzle to print both helmets, but u can use 0.4 mm nozzle Layer Height : 0.3 mm Perimeters: 2 (1.2 mm) Infill : 5% Giroid Supports: Yes
Likes
2305
Downloads
0