Sony HDR AS20, AS15, etc. No-Gimbal Mount for DJI Phantom 2
Description
I Have Progressed Beyond This To Working On A Gimbaled Version, But Thought Someone Might Want To Use These Files Which I Used On My Testbed Phantom A Couple Of Months Ago. I Will Post The Sequel With A Controller When I Get It Finished. You Will Need To Use 2 M3 Screws And Nuts To Attach The Bracket To The Plate And An M5 (Or M4 With A Sleeve) Screw And Nut For Mounting The Camera Clamp To The Bracket. You Will Also Need 4 Anti-Jello Rubber Mounts: 7Mm X 21Mm. Not The Tiny Dji Type. Print 2 Plates. These Plates Have All The Holes For This Design And Will Be The Same For The Controller And Gimbal Version. You Will Also Need 4 M3 Screws To Attach The Upper Plate To The Body Of The Phantom. That White Thing Is A Lens Cap Available Elsewhere Here On Thingyverse. An Alternate Plate Design Can Be Found Here: Http://Www.Thingiverse.Com/Thing:677486
Statistics
Likes
35
Downloads
0