Qiagen TissueLyser Adapter
Description
This is an adapter for the Qiagen TissueLyser. These adapters sometimes break so I replicated the design. The three-part design has been tested with liquid nitrogen (Hatchbox PLA, 20% infill). The file is available as a single STL or in three parts which include slots and tabs to glue together (this also ensures the holes are exactly aligned). If you print in three parts, be sure to use a silicone-based glue or other glue that can withstand subzero / liquid nitrogen temperatures. © Seashore Design / Adam Flanders for the Salk Institute for Biological Studies. For educational purposes only.
Statistics
Likes
2
Downloads
0