Mic stand adapter for Handy Mount by defucilis
Description
This is an adapter for https://www.thingiverse.com/thing:4631423 to allow for it to be used with a microphone stand. This will connect to the 30 mm spaced M4 holes and the end of the mic stand boom will go through the main 5/8" hole. The side of the adapter with the supports should be facing you. The 5/8"-27 nut or microphone holder should be on the side facing you and screw on to secure the adapter to the mic stand To use this, you will need: - 3d printed mount by defucilis - 2 M4-0.7 x 25 mm screws - 2 M4-0.7 nuts (wing nut or hex nut will both work) - microphone stand (5/8"-27 thread) - 5/8"-27 nut or microphone holder
Statistics
Likes
1
Downloads
0