fan funnel reduction 25 to 50 mm for rebel2.stl
Description
I Didn'T Want To Buy Small Fan (25Mm), Because I Head Plenty Of The Bigger Ones (50Mm) When I Needed A Fan For My Coldend (Cooler) Cooling. I Had A 25Mm Fan Cooler Mount Piece (Blue On The Photo) Which Came With The Printer Parts So I'Ve Done A Reduction. Originaly It Is Planned For A Czech Printer Rebel2, But You Can Use It With Anyithing That Works. You Will Need - <2, 4> M3 - 10Mm Bolts For The 50Mm Fan - <2> M2 - 5Mm Bolts For The Reduction To Cooler Mount As I Didn'T Designed It With Axial Symetry - To Be As High As Possible (Why Not If I Can :) ), So I Didn'T Manage To Insert M2 Holes In Every Corner Only In The Two Upper Ones. So After Bolting There Is A Small Gap On The Bottom, But Nothing What The Insulating Tape Would Not Handle ;) It Printed Just Fine With Slic3R Over Repetier Host On 0.4 Nozzle With Pla. I Thickened The Most Tilted Wall As It Seemed A Little Too Steep And Thin.
Statistics
Likes
5
Downloads
0