Lithophane Lamp Box
Description
Hello. This is a lithophane case i designed with Fusion 360, printed on a Prusa Mk3s. I used a LED strip 5V and 30cm long. Be sure that u don't make the same mistake as I did at first and really use a 5V LED strip instead of a 12V one... 12V is getting way too hot inside the Case... Link of the strip I used: https://www.amazon.de/CUQI-USB-Nähmaschinenlichtstreifen-LED-Nählichtstreifen-LED-Fit-Nähmaschinen-Küchenschrank/dp/B082XRW4WD/ref=sr_1_1?dchild=1&keywords=CUQI+LED&qid=1618505879&sr=8-1 I created the Lithophanes on this website: https://3dp.rocks/lithophane/ Be sure to use the right settings for your lithophane! The important model settings I used: Maximum size: 74 Thickness: 4 Border: 3 Turn your Image to a positive image inside of the image settings! To make it fit you also need to use a picture with the following size: Width: 815 Piixels Height: 934 Pixels I did that with the free program: Paint.net Happy printing :)
Statistics
Likes
7
Downloads
0