Elna Air Electronic Sewing Machine Cord Protector
Description
If you have or have bought an in cabinet machine with a missing cord protector (the part that passes through the metal base at the back), here is a simple 3D printed part that should work. Our latest machine, a school Jubilee special, came with the part missing. Probably won't go into a cabinet but now it is complete. After the part is printed, spread the bottom apart with your fingers and work the cord in from bottom to top. Then you can snap the part into the machine and you are good to go. To remove, rotate the slot to the opening at back of machine and squeeze together while pushing upwards.
Statistics
Likes
1
Downloads
0