XTLW6 SKR Pro and Octoprint Mount / mod
Description
Split up into smaller chunks so it could be printed on my 180x180mm secondary printer. Assembly: - Insert brass stand offs from existing electronics mount into Body 1 and Body (Insert carefully with a hot soldering iron to ensure these parts are embedded in their correct alignment) - |"Body 1" mounts onto "Body 2" using "brace" and 4x 10mm M3 bolts and nuts (or longer); ideally also glue the brace down so it really holds the parts together. - "Pi mount" goes onto resultant assembly using 4x 15mm M3 bolts and nuts (or longer) - Same for 40mm fan mount
Statistics
Likes
0
Downloads
0