4 Channel MOSFET (DIN Rail) Mount for Voron 2.4
Description
When building the Voron 2.4 I wanted to control multiple 12v fans so obtained a 4 channel MOSFET board, the board seems to be widely available on Aliexpress. The board can be found here: https://www.aliexpress.com/item/1005001552203446.html This case is designed to attach to the 'pcb_din_clip_x3.stl' as part of the Voron printed part list. You will need 2x M2 Self Tappers, 6x M3 Heatset Inserts and 2x M3 6mm BHSC. There is also a simple decal that goes along with the case which can be found here: https://svgshare.com/i/WKX.svg The decal should be scaled to 67.5 mm x 21.2 mm As a side note, I had a few small heatsinks lying around so decided to use them even though they are completely unnecessary as the MOSFETs on the board are hugely overrated for a fan. If you want to use the same heatsinks they are 9mm².
Statistics
Likes
1
Downloads
0