Corner mount for ELP infrared web cam V2 (eg. on Lack enclosure)
Description
A corner mount for the [ELP infrared USB web cam](https://www.amazon.de/gp/product/B07G56RTW8/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=hoeni-21&creative=6742&linkCode=as2&creativeASIN=B07G56RTW8&linkId=323893159fdb69a1cc3bba15e38cc780). Perfectly suited for getting mounted inside of an Ikea Lack enclosure to monitor print success with an Octopi. No screws or glue required (aside for fixing the mount to the Lack leg). The cam can be snapped into the mount and taken off again when required. In the end the top lid may be a little loose (depending on your printer), but I was too lazy to fix this, as it was "good enough" to get used :-) When you need the cable opening on the other side just mirror the bottom part in your slicer before printing. When mounting, please mind the orientation of the bracket: The thin side of the slide is the upper side, the thick end is for bottom! No supports required. I did successful prints with PLA and PETG in 0.20 with 15% infill.
Statistics
Likes
0
Downloads
0