PrusaSlicer Infill Patterns Display
Description
- v2 version is ready!! - This is infill patterns display of PrusaSlicer.(size: 16cm x 16cm) I was impressed by ccarbs' "cura infill display" (https://www.thingiverse.com/thing:4702781) and wanted to make a version of PrusaSlicer. I have never used various infill patterns, so I learned a lot by making this one. [How to print thing] 1. start PrusaSlicer 2. open the project file(.3mf) menu>File>Open Project... (don't use Add-button)(The .stl file is for reference only and is not used.) 3. change the filament and printer type to suit your print environment 4. slice 5. export G-code 6. print [caution] -If you want to print this thing, you have to use "PrusaSlicer" as a slicer. -Each block is an independent object, so be careful not to change its position carelessly. If you want to change the print position, select all the parts and move them. [note] -The version of prusaslicer I used is 2.3.1 win64. -Unfortunately, the difference between "adaptive cubic" and "support cubic" is not clear in this sample. [revision] 2024/04/22(v2) The "archimedean chords" and "octagram spiral" patterns were off-center, making it difficult to understand the characteristics of the shape. This was fixed by changing the original 3D structure and slicing method.
Statistics
Likes
915
Downloads
0