RockPro64 case for Monero node
Description
This is a remix of a case I found to fit my RockPro 64. But the lid didn't fit the NVMe to PCIE x4 adapter properly so I removed a post and then added some logos to make it pretty. Use Prusa Slicer to swap filaments at the layers. I recommend reinforcing the posts you screw into with some superglue or something, but I recommend short M3 screws to mount the board as well as lock the lid. It has a slot for a 40mm Noctua fan which I plan to upgrade to when I get the passive heatsink. You will need supports ideally but just for the very large gap for most of the ports, you don't need supports really anywhere else to be honest as PETG bridging does just fine on its own. I managed to get my Rock Pro 64 4GB with a 16GB eMMC for OS, the Pine64 PCIE x4 to M.2 adapter with 256GB Inland Premium NVMe SSD, and their 2032 coin cell battery back up (with velcro) to all fit no problem. Airflow is perfectly fine with the 10mm low profile with fan, but I recommend a 30mm passive with a Noctua 40mm fan attached via USB or something for it to be less noisy. You can tip me at: monero: 46jvfcczuL66HF2uX2ZqgvbUf4zZkoooXPZkqdPMnMajdFHAmqDRhKY4vzRgj8TAcwMcgLYBsQnNK5yBqvzeqmNB5s4gWWH bitcoin: bc1q8lkpsrqfa3m2x49v4hdw2w9rt2d6hzp4yfgcp6 litecoin: MFruL3oxGQQpgZvwvNHXEhQPLtYMqhh5s4 dogecoin: D5TPfCrDATVqS8XWeMPnYdC3e87vAEpug9
Statistics
Likes
1
Downloads
0