Spacers for GT Omega ART shifter mount
Description
A series of spacers for fine tuning the position of the shifter mount on a GT Omega ART sim racing cockpit. Provided are 5mm, 10mm, 20mm, 30mm, 40mm and 50mm spacers, although you could simply use scaling in the slicer if you want an exact custom size. I created these because the design of the mount is such that the mounting leg fits to the mounting plate fits on one or the other side. That moves the plate / shifter about 11cm (or a little over 4 inches) and I wanted to fine tune that. Simple enough to use, see the photograph for reference. You will need M6 screws of an appropriate length of course. You may need to clean up the screw holes depending on the tolerances of your printer.
Statistics
Likes
1
Downloads
0