OpenRC F1 CyberTruck Frame Lift Kit
Description
Lift kit for the CyberTruck body built for the OpenRC F1 frame. I had trouble with the tires rubbing on the frame so I made these spacers that also serve as additional structural support for the chassis. The solid walls also act like guards to prevent dirt and debris from entering most of the internals of the truck body. The rear spacers are labeled left and right because the holes are not centered in the Wheel Axle Holder pieces on the original OpenRC F1 files. When properly aligned, they should fit without overhang on any side. Recommend using 20 or 25 mm m3 bolts to span the chassis, spacer and truck frame parts in order to reach the nuts.
Statistics
Likes
2
Downloads
0