Mounting Bracket for Potentiometer or Input/Output Jacks
Description
SUMMARY: Components in the Phase Dock Group are designed to work with and augment the Phase Dock WorkBench ecosystem. https://phasedock.com/ The WorkBench: • Accelerates electronic prototyping and project building • Minimizes the time spent mounting and organizing electronic components • Adds protection and portability to what would ordinarily be fragile APPLICATIONS: This adapter is ideal for mounting potentiometers, input and output jacks, LEDs or other similar components to your Phase Dock WorkBench project. It perfectly fits a Phase Dock 1x3 ClickTM connector and can be attached using superglue. (See assembly instructions below.) CONTRIBUTOR: MattG, Galveston, Texas. Thanks Matt! SPECIFICATIONS: • Hole diameter: 9.6mm (0.378”) • Bays: three different widths: 23.5mm, 25.5mm and 27.4mm • Base: 40mm x 85.4mm (1.56” x 3.35”) (perfect fit for the 1x3 Click from Phase Dock) ASSEMBLY INSTRUCTIONS: Draw a bead of super glue (cyanoacrylate) on the top of the CLICK (NOT the Bracket) following the pattern shown in blue in the photo. Be careful NOT to glue the corners of the CLICK where the springs are located (marked in red). Your Click will not function properly if the springs are immobilized. Spread some glue in the middle if desired. ADDITIONAL RESOURCES (seen in some photos): • Adafruit Mini Solderless Breadboard 4x4: https://www.adafruit.com/product/2463 • Adafruit Mini Solderless Breadboard 2x4: https://www.adafruit.com/product/2017 • Adafruit Mini Solderless Breadboard 2x8: https://www.adafruit.com/product/2018 • Phase Dock WorkBench 1007 in black matte: https://phasedock.com/product/workbench-1007-kit/ • Phase Dock 1x3 Click connector (package of two): https://phasedock.com/product/1x3-clicks/
Statistics
Likes
6
Downloads
0