Mahindra Roxor Side Mirror Extender
Description
This is a side mirror extender for the Mahindra Roxor 4x4 off-road only utility vehicle assembled by Mahindra Automotive North America since 2018. MANA is the US arm of Indian automotive company Mahindra and Mahindra. The extender adds approximately 65mm (2.5") to the mirror mount and allows for a better view behind the vehicle especially when towing a trailer. ### Mounting Two of the original bolts (with the allan-key heads) fit perfectly without modification. The other two bolts that I received from the person requesting this part were not the original, so two additional length bolts/nuts will be required to mount at the mirror end. ### Print Recommendations I recommend increasing the infill density (in my case from the Cura default of 20 to 40) for strength. ### Filament Choice Has not been tested in the real-world yet. As this is for outdoor use it is **not recommended** to use **PLA/ABS**. It is preferable to print in a more outdoor-friendly filament such as PETG/ASA that will stand up to the temperature changes and UV rays.
Statistics
Likes
2
Downloads
0