Sonicare HX6100 Wall Mount - Double-sided Tape
Description
This is a remix of [thing:1118084](https://www.thingiverse.com/thing:1118084) by [Roy Edwards](https://www.thingiverse.com/endar). This is a **wall mount for Philips Sonicare HX6100 chargers**. It's intended to be mounted to a wall or tiles using double-sided tape such as 3M VHB and resembles a Feller light switch to blend in nicely. Note that this is the EU charger version but a US charger probably fits too. You can remix this using the STEP files in the downloads section or directly [edit in Onshape CAD](https://cad.onshape.com/documents/d7929b1b81bab2cd3d00e32b/w/819d6727f4b1629fc0cef698/e/6841ce3391f7a93d22290836). ### Additional Hardware - 2 x M3 brass insert 5mm to 7mm long - 2 x M3x10mm screw (8mm probbaly works too) - Double-sided tape  ### Printing It is recommended that you print with very high detail at **0.1mm layer height** in order to get a smooth finish. Especially the the plate because it has a curve. You can use 0.2mm for the holder but 0.1mm obviously looks nicer. Use 3 or more perimeters to support the screws and 10% or more infill. You can print this in what ever material you like. PLA is strong enough for this.  ### Post Processing & Assembly - Clean out the holes of the holder with a 3mm drill bit. - Expand the holes on the plate for your brass inserts if they don't fit. I used a 4.5mm drill bit. - Insert the brass inserts using a soldering iron. Set the soldering iron temperature to approximately your printing temperature. - Screw the holder on to the plate using the M3 screws. - Apply double-sided tape to the back of the plate and mount it to the wall. - Thread your charger's power cord through the holder from the top and seat the charger in the holder.  
Statistics
Likes
6
Downloads
0