Safety Glasses Wall Mount (i use Bolle Tracker glasses)
Description
A wall holder for safety glasses, the text is my favourite quote by "Mustie1" on youtube. The glasses i use are called 'Bolle Tracker' and are sold in the uk by toolstation amongst other places: https://www.toolstation.com/bolle-tracker-hybrid-safety-glasses/p21793 These are the best safety glasses i've found so far, having seals that press against your face gently, i've not had them fog up on me yet. The holder is in 2 parts, The nose piece is best printed the way it sits when you load it into slicer, with supports from the build plate to support the inside top of the triangle. The Back piece is printed laying on the build plate, counter sunk screw holes down, no supports needed. There's a choice of a plain back with no text, and the version with the text. if printing the latter add a manual filament change for the last 2 layers in slicer (or print in one colour, then colour the raised text with a marker/paint etc) There's 3 holes for countersunk M4 screws to join the 2 pieces together... matching M4 x 0.7 threads are in the nose piece.. you could drill them out and use a nut if you wanted, 3 fixing points are a bit much, so i just used the upper middle one, and it's plenty strong enough for my personal workshop, glue could also be used i guess, but i prefer a mechanical connection where i can use one.
Statistics
Likes
14
Downloads
0