Z-Motor mount for Dremel CNC
Description
A mount or adapter for your Z-motor on the Dremel-CNC of Nikodem Bartnik. Two plates with 4 M5 bolts and a couple of nuts and rings. The bottom-plate is fastened on the original holes for the motor. The wheel for manual adjusting is pressfitted (or glued) around a solid coupler (the blue ones, 14mm). The holes in the side of the wheel must be aligned with the grub-screws. You can also use M3-screws instead of the small grub-screws. It fits with a 500w-Spindle and its aluminum bracket. By removing the thicker part on the bottom plate you can also use it for other axis's on other (homebrew) machines. The two stl's are the same parts. Step-file is also added. Happy CNCing :)
Statistics
Likes
2
Downloads
0