Electric Guitar String Winder 8.3 mm x 18 mm
Description
Update: 4-27-2021 ---------- I made the snap-fit grooves in the handle longer and at an angle to make them less likely to snap off due to brittleness. I tried printing the new handle at a 0.2 layer height and it is much more flexible and resilient while still maintaining good tolerances for motion. ------------------------------------ This is a Remix of Pieppo's excellent string winder. https://www.thingiverse.com/thing:3081 I made the hole for the tuner a bit wider and not quite as long so as to fit the 6-inline tuners on my Peavey Raptor Plus. The new size is 8.3 mm x 18 mm. I also altered the hole for the handle to accept a snap fit so a screw isn't needed. I changed the handle to be a snap fit so a screw isn't needed. Just carefully but assertively push it into the hole until it snaps and you're done. Neither needs supports if printed in the original orientation, at least on my modded Ender 3. The bridging for the tuner part is quite short. I'd love to hear feedback about how it works for you, or mods you'd like to see!
Statistics
Likes
0
Downloads
0