Low Profile Filament Spool Roller
Description
Low Profile Filament Spool Roller for 608 bearings. The spool is only 2 mm from the ground. I have a hermetic case for the filament and it's minimal taller than spool. That's why i needed a low profile spool roller. You can print 2 or 4 side part to clip them together. I printed only 2 and the bearings sit tight. You will need also 2 connectors if using only 2 parts. If using 4 side parts you don't need to print the connectors. The connectors are little bit tight and i had to use sandpaper on the sides.But You can scale it down a little bit. I preferred to sand them so it's really stable.
Statistics
Likes
3
Downloads
0