Redcat gen7 Everest suspension mod
Description
With this mod, you move the upper shock mounts into the center of the car to give you a much better turn radius and a greater axle drop. After adding the mod, please move the steering link on the servo arm to get a better turn radius. I ended up mounting this in the back as well to get the same suspension handling on both axels. You need the following additional parts: Front; 4 pcs M3x8mm 2 pcs M3x30mm Back; 4 pcs M3x8mm 2 pcs M3x20mm You may have to turn and/or relocate the body mounts. In front you may have to cut some unnecessary plastic (see picture).
Statistics
Likes
1
Downloads
0