Super Accurate Ender 3 Direct Drive Retraction Test !
Description
ONLY DIRECT DRIVE RETRACTION TEST!!!! Added longer retraction tests CURA SETTINGS: INFILL 100%!!!!! COMBING MODE: NOT IN SKIN!!!!!! Your "BASE" retraction is 0.1mm !!! If you want to use "speed15" stl file, you need to change your restraction speed to 15mm/s, if "speed20" so you need change retraction speed to 20mm/s etc. etc.... In Cura post-processing gcode extension settings add Change At Z: LAYER 35 - 0.2MM RETRACTION LAYER 65 - 0.3MM RETRACTION LAYER 95 - 0.4MM RETRACTION LAYER 125 - 0.5MM RETRACTION LAYER 155 - 0.6MM RETRACTION LAYER 185 - 0.7MM RETRACTION LAYER 215 - 0.8MM RETRACTION LAYER 245 - 0.9MM RETRACTION LAYER 275 - 1MM RETRACTION
Statistics
Likes
10
Downloads
0