3rd Gen Dodge Ram USB Port for Aftermarket Stereos
Description
Made this USB Port for my 3rd Gen Dodge Ram 3500 with an aftermarket stereo installed. The USB port comes hardwired on the back of the stereo, as with some single DIN and Double DIN stereos. My 12V port was broken and wouldn't stay secured, so I printed this to replace it. Tolerances are fairly tight, so long as there's not a whole lot of stress pulling on it, the print will stay in place just press fitted into the console. USB port will slide in snug and stay in place without glue. If yours is too loose, a dab of hot glue on the back will secure easily without too much hassle to remove. The back end is long enough to encase some length of cable to prevent bending of the wire. Printed in white PETG and painted black since I didn't have any black filament., however I would recommend black or grey ABS/ASA to match factory look and be more resilient to heat.
Statistics
Likes
4
Downloads
0